Andersen, EL winch 40 FS E1 12V

Description

Andersen's E1 electric winch is designed to hoist and trim sails at the push of a button. The powerful 12V motor allows all crew members to handle lines efficiently.

• Brand: Andersen
• B: 152 mm
• D: 75 mm
• Gear: 21
• H: 182 mm
• J: 180 mm
• L: 79 mm
• Max deck: 49 mm
• Motor: 0 HP
• N: 304 mm
• S: 64 mm
• Rope Ø: 8-14 mm
• Type: Winch 40 ST
• Volt: 12 V
• Product weight: 19 kg
• Made in: Denmark
• Package dimensions: Size: 74 cm × 35 cm × 35 cm | Gross weight: 19.16 kg

Andersen offers several types of electric winches. The most affordable version is a 1-speed motor, available in sizes from 28 to 72. Here you get a powerful motor and, at the same time, the option of a 2-speed manual winch.

Andersen E1 electric winches give you the ability to hoist and trim sails of any size at the push of a button. They eliminate the need for physical strength, allowing all crew members to handle lines and sails easily and safely.

Easy installation The motor has 2 built-in relays, which means a more reliable, neater and easier installation. Installation only requires connecting the positive and negative power cables to the motor terminals and connecting the supplied control push button using the output cable. A circuit breaker, which is not included, must be installed to protect the system.

Efficient, high-quality motor At the heart of the E1 winch is a high-quality motor, produced and developed in Europe. Carefully matched with the optimal gearbox, it delivers high speed under low load and low speed under high load for safe fine-tuning when trimming.

Illuminated “intelligent” Push Button The E1 winch comes with a push button with integrated LED, which lights up when power to the winch is switched on. The push button has a protective cover that prevents accidental winch operation and is IP67 waterproof. The push button also functions as a control unit with flashing status codes that assist with troubleshooting in the event of overload or other faults. A cable for connecting the push button is included for easy installation.

Unmatched monitoring and protection:

• Integrated overload protection - The control system is preset to stop the winch if Maximum Pull Load is exceeded. Operation can resume within a few seconds once the load drops back below the limit.
• Thermal overload protection - The motor deactivates in the event of overheating and automatically resets when the temperature returns to normal.
• Reverse polarity protection - An integrated 5 Amp fuse protects the motor against incorrect cable connection.
• Accidental start protection - The winch is deactivated if the push button has already been activated by mistake.
• Low Voltage Detection - Operation is deactivated if the battery level is low, preventing further battery drain and avoiding low-voltage reset of navigation instruments and other electronic equipment.
• Continuous Run Time - The winch stops if continuous operating time exceeds 10 minutes.
• Manual operation - The winch can still be used as backup in manual mode.
• Incl. switch with 40 cm cable